This is a project that we started in January. It's been slow-going, as usually only one day a weekend gets assigned to it! But this is just fine with me--we have another full bathroom to use and we can just close the door to this one when we're not working in it. I don't know how people manage to renovate having only one bathroom. I guess you would have to move out temporarily and work on it full time, none of this 4 hours a week laziness!
This first photo is what it looked like when we first moved in. Since then, we have painted the walls, cabinets, and replaced the toilet. I liked the slate tile floors but they were very cold in winter and extremely hard to keep clean. Never was fond of the shower-jetted tub combo, but it was fine while it lasted.
|4 years ago (realtor photo).|
We decided that in order to fit a separate tub and shower, we would have to reconfigure the entire room. So up came the floors and out came the drywall and insulation. We did find some beautiful fir hardwood flooring, probably from the 30's when the place was first built, but it wasn't really enough to justify salvage.
|The demo day|
Now for the fun stuff!
The tub is a standard 5' soaker tub made by Hytec in Armstrong, BC. The 3' square shower will be tiled adjacent to the tub with a custom glass surround. All the fixtures are from the Grohe 'Atrio' line- ceiling-mount rainshower head, adjustable bar-mounted spray showerhead, and wall-mounted tub filler and lav faucet.
As for the tile, we're going with something really different for the shower floor. It's a small area so we can afford (barely!) the $40/sqft price tag, and it will add just that extra bit of vintage charm in an otherwise modern room.
|'Julia Mosaic' 3'' x 3.5'' ceramic floor tile made by Walker Zanger.|
The shower walls, vanity and tub backsplashes will be a stacked grey and white marble.
|'Bianco Macchiato' 5/8'' x 6'' marble on 12'' x 12'' mesh sheet made by Ames Tile & Stone.|
I realize this is a very classic look at first glance, but I think modernizing the tile will be made fairly easy with the addition of concrete counters for the tub surround and vanity top, plus the fir window, vanity, and towel shelf. These were my two primary inspiration photos:
As for the floor, I really wanted to do a polished concrete because a) we could pour it ourselves, therefore saving money ; b) the smooth surface would be a dream to clean--no grout lines, unnevenness; and c) it would match the countertops nicely so that there wouldn't be more than 3 different solid surfaces in a small area. Alas, I've had to nix that idea because you need a minimum 1.5'' of space on top of the heating wire in order for it to meet minimum code requirements for concrete. Right now we have about 3/4'' which would be just enough for a tile floor. And I don't really like the idea of a 3/4'' step up into the bathroom. So my plan is to wait until the concrete counters are poured, and then try to match them up as close as possible to a large porcelain or stone tile.
I think that the vanity is really going to be my favorite part of the entire bathroom. This is where I got the initial inspiration for the reno. Excuse the photo quality; it is one of those 'i-phone camera taking a picture of a picture' type of photos.
Of course, there isn't enough room to do the double-sinks (or double-drawers for the matter) in this tiny bathroom, but the basic floating style with cut-out drawer pulls and the wall-mount faucet will be there. We've had the plumbers push the p-trap drain back as far as possible so that drawer space is minimally affected. There won't be any storage for towels, so we are also having a floating shelf made of the same material as well, to be mounted on an adjacent wall. The sink will be a rectangular undermount made by American Standard.
|American Standard 'Studio Undercounter Sink'|
As for lighting, we've installed 5 low-voltage halogen potlights - plenty bright so we will also add a dimmer switch as well. And instead of sconce lights flanking either side of the vanity, I've ordered two Edison-style bare bulb pendant fixtures in keeping with the vintage-modern look I'm trying to achieve. However, unlike the bulb pictured below, I have ordered replacement bulbs at a longer length (inspiration below right). The ceilings are vaulted and quite low on the vanity side of the room, so if we find the longer bulbs hang too low, we can just swap em out for the ones that came with the fixtures.
|(L) Bare Bulb Filament Pendant from Restoration Hardware; (R) inspiration photo.|
Our Toto dual-flush toilet will stay, as it's pretty much still brand new. A very luxurious addition will be the heated towel rack, which will be mounted behind the door and next to the shower. And last but not least, the über-cool electronic deck-mounted skylight. It opens via a wall switch, and even has a built-in rain sensor in case you forget to close it after your shower! Yes, completely and totally overkill and unnecessary but a great party trick, no?
|Toto 'Aquia II'|
|Velux curb-mounted electric-venting skylight|
|Amba 'Quadro Q-0233' towel warmer|
So, where are we at now? The floor has been re-framed and re-sheeted. Heating ductwork has been re-routed. New plumbing and electrical has all been roughed in. We've got all the plumbing fixtures in the house. Haven't ordered any tile yet. Pouring concrete tub surround tonight. Plans for the vanity will be submitted to our cabinet-maker this weekend. Still need to find/make a mirror. Spray foam insulation coming next week. I'll keep you posted!